Applications

	DM&P Applications

Home : Products | Applications | Technical Support

2005/04/13

DM&P have experience to support OEM/ODM projects since 1989. Owing our kernel technology as below that we guarantee short lead-time from scratch to physical sample.

Proprietary DM&P M6117D 386SX CPU kernel technology.
Build-in GPIO function in CPU.
Capable of supporting DM&P BIOS and O/S (X-DOS, Embedded Linux, etc.) modifications.
Capable of integrating application software, O/S and BIOS into a single chip (Flash, EPROM or ASIC).
Provide consultant DSP/ASIC design.
All-in-one design and guarantee for smallest PCB design upon request.
Supports operating temperature approximately from -20 to +60 Degree C.
Flexibility of custom specifications.
Guarantee afford ability and long-term support of all products.

PCI/ISA Engineering PC

The DMP-1032 Engineer Computer is a standalone Vortex86 PC PCI/ISA Interface Development Testing Protector. The "Engineer Computer" is equipped with a PC system that protects its "own" system from over-voltage, rush current and shorting of interface signals during the development of your I/O card and specific custom-made hardware during your experiment in laboratory.

This device allows you to perform your PC I/O card development within a PC test platform that provides protection from faulty designs and improper soldering resulting in shorting of signals. After a fault condition, the PC system operates normally without hanging up, allowing the user to debug the faulty target I/O card without powering off and repowering the connected PC.

Mity-Mite Module Demo Box

Mity-Mite Module is a PC-based specification bundled with BIOS, OS, and software into a single chip. We provide a Mity-Mite Module Demo Box to show text from browser, send/receive mail and accept FTP download/upload. The main program is from start-up project of DSock examples and use MakeROM to make ROM image.

You can download source code to know demo box how to initialize GPIO, drive graphic LCM and use DSock to build Internet application. We also provide Linux demo version without mail function and port LCM library from DOS to Linux.

Web Page: http://www.dmp.com.tw/app/mitymite

Mity-Mite Serial Server

It is a light version of RSIP which only support Host-Based/RS232_TXRX_DTE mode. User can connect RS-232 device to COM1 of Mity-Mite Serial Server and use TCP/IP over Internet to access this device. Because of the same kernel of RSIP, you can use RSIP setup program to setup Mity-Mite Serial Server. It is a light version of RSIP that only support host-based mode, RS232_TXRX_DTE mode of RSIP. Go to http://www.dmp.com.tw/app/mitymite/#mrsip to get more.

Mity-Mite LT200

LT200 is a LAN terminal that can receive commands from TCP/IP. User can use LT200 to control input and output relays. Because of TCP/IP protocol used, user can control it every where from the world.

8 relay inputs and 8 replay outputs.
Serial port to Ethernet function support.
Support TCP command to send/receive I/O message.
Support HTTP command for web applications to control I/O.
Support UDP initial command set to setup LT200.
Firmware update via FTP protocol.
DSock Update utility compatible.
Web server inside.
Full source code for user to modify.

Web Page: http://www.dmp.com.tw/app/lt200

RSIP Serial Server

RSIP serial server is designed to connect a serial device, RS-232 or 422 or 485, to your network, which can convert protocol between PC and serial port device. This solution allows a remote PC or Terminal to monitor, configure, manage and send or receive data to/from the serial port device via the LAN. There no need of software modification when the RSIP function is required. RSIP Serial Server also supports auto-recovery and auto-connection. Which "Client" RSIP will auto-connect to "Server" RSIP without any instruction. Whenever the communication problems occur, RSIP will automatically diagnose the network status and reset to initial state.

Web Page: http://www.dmp.com.tw/app/rsip

WebCamera

WebCamera is a camera can be viewed from Internet. User can use browser on any PC to view it. It's also support digital input and output for security system. It is cost effective, compact size and easy to install & configuration. User can download data sheet, circuit diagram and DOS compression library from our web site.

Feature

Separated view windows for 16 channels.
NTSC / PAL support.
Sensor/Alarm: 4 set NC/NO connector map to 4 channels video-in.
Capacity of storage: 1 internal Compact Flash slot can install up 256MB CF card.
User's option to record time range before/after trigger enabled.
Record frame can be view by any browser.

Web Page: http://www.dmp.com.tw/app/webcamera

Remote Keypad

For consumer products development, we provide remote IR keypad module: IR only and IR with keyboard.

User can use consumer controller with 38KHz IR to send keyboard message. It also can wake up your product if ATX power is installed. For programmer, it is standard keyboard press message and no more extra operation is needed. IR module is easy to use and save a lot of development time.

Web Page: http://www.dmp.com.tw/app/rkp

Technical Support

If you have any problem, feel free to mail to tech@dmp.com.tw please.

Email us: info@dmp.com.tw

DM&P Applications