DM&P Mity SoC: Setup Your Development Environment

Home : Products | Technical Support

2002/12/09

For easily develop, we recommend those development environment:

• Development on Mity SoC
There is a IDE port on development board that you can install hard disk on it. Because our BIOS can read first 8GB, you can not make a FAT32 partition larger than 8GB. If you use FAT16, you can have 4 partitions each one is 2 GB. On our test, you can install 10G/20G/30G hard disk that our BIOS can recognize them.

After installing hard disk, you can install your development software like C/C++ compiler and write/debug you program on Mity SoC.

• Upload Program via Serial Port
We provide a serial port sending/receiving file example for Mity SoC. Programmer can use it to upload program via COM port. Download serial port transmission program and source code from Serial Port File Transfer Example

• Upload Program via Ethernet
If you have PC104 LAN card, you can use FTPD.EXE which is a FTP server example of DSock library. You can build your program on other machine and upload it via FTP.

• Use EEPROM Writer
If you Mity Soc module is BIOS + Flash disk, you can use the MakeROM utility to make ROM image. Use EEPROM writer to image into Flash on Mity SoC.

After environment setup, go to Examples & Tools for Mity SoC to get more programming examples and tools.

Technical Support