- Step 1: Search LT200 Devices
- Press "Search" button to search all LT200 devices.
It will select the first device found and get its setup value.
LT200 will beep twice when setup program get setup from it.
- Step 2: Set Your Setting
-
- Security
- You can set your password for FTP and HTTP.
- Network
- It's the general network setup. Call your MIS to get more information.
- Serial Port
- COM port parameters. They should be the same as the device attached with LT200.
- Step 3: Save Your Setting
- Press "Save" button and setup program will send your setting to LT200.
After saving operation is okay, LT200 will beep three times.
- Step 4: Reboot LT200
- Press "Reboot" to reset LT200 to load new setting.
|
|
